Obligation to Recover CFCs
Chlorofluorocarbons and Hydrofluorocarbons (collectively referred to as "CFCs" on our website) used as refrigerants in car air conditioners cause ozone depletion and global warming, and international policy now calls for their reduction and elimination. The Automobile Recycling Law requires that a CFCs recovery company recover fluorocarbons.
![](https://jarp.org/wp-content/themes/jarp.org/img/products/freon1.jpg)
CFCs collection and destruction consignment
Automobile manufacturers are responsible for taking back the CFCs delivered by the CFC recovery operators and entrusting them to be destroyed.
![](https://jarp.org/wp-content/themes/jarp.org/img/products/freon2.jpg?202402)
Collection Standards
Automobile manufacturers have established Collection Standards to ensure safety in the collection, storage, and transportation processes, as well as to achieve convenience and social efficiency for CFC recovery operators.
*Please note that if the "Properties," "Packing Style," and "Pick-up Method" specified in the collection standards are not met, the pick-up will be refused in principle, and no charge will be made for the recovery of CFCs.
Collection Standards for CFCs
Items | Main contents of the standard |
---|---|
Properties | (1) Do not mix different gas types [CFC (R12)/HFC (R134a)] in cylinders to be used. (2) Do not mix CFCscollected for reuse with CFCsdelivered to automobile manufacturers, etc. (3) Do not mix CFCscollected for reuse with CFCsdelivered to automobile manufacturers, etc. |
Packing Style | (1) From the safety viewpoint, deliver cylinders per the "Guidelines at the time of cylinder delivery" specified by automobile manufacturers, etc. (2) A letter of delivery for CFCs must be attached to each large cylinder and dedicated pallet (it is not required for the designated payment-on-delivery method). |
Receiving Method | (1) CFCs must be delivered to the designated pickup location by the transportation method applied for in advance. (2) Delivery reports must be submitted under the electronic manifest system. |
List of designated pickup locations
Revised on January 1, 2021
Company Name | Location |
---|---|
Sapporo Plant, Hayarai Kouei Co., Ltd. | 3-750-6, Shinko Chuo, Ishikari-shi, Hokkaido 061-3242, Japan |
Ecosystem Akita Co., Ltd. | 42 Aza-Tsutsumisawa, Hanaoka-machi, Odate-shi, Akita 017-0005, Japan |
Chiba Plant, AGC Inc. | 10 Goi Kaigan, Ichihara-shi, Chiba 290-8566, Japan |
Ecosystem Sanyo Co., Ltd. | 1125 Kichigahara, Misaki-cho, Kume-gun, Okayama 708-1523, Japan |
Satsuma sanso kougyou Co.,Ltd. | 3-42 Tokai-cho, Kagoshima-shi, Kagoshima, 891-0115, Japan |
Okinawa CFC Recovery and Disposal Co., Ltd. | 401 Minatogawa, Urasoe-shi, Okinawa 901-2134, Japan |
Recycling fees by vehicle type, fees paid to vendors, and status of recycling, etc., based on the Automobile Recycling Law
-
Domestic auto
-
Imported car
- Mercedes-Benz Japan
- Mercedes-Benz
- Smart
- Volvo Car Japan
- Volvo Car Japan
- Jaguar Land Rover Japan
- Jaguar
- Land Rover
- BMW Japan
- BMW
- MINI
- Volkswagen Group Japan
- Volkswagen
- Audi
- Lamborghini
- Bentley
- Rolls-Royce (before 2002)
- Stellantis Japan Ltd.
- Peugeot
*Please refer to the website below for information on imported cars, etc., other than those listed above.
Japan Automobile Recycling Promotion Center
*For parallel import cars other than the above, please refer to the website below.
Japan Automobile Recycling Promotion Center
Transportation charge
What to do when the Automotive Recycling System stops
If a disaster, failure, or some other malfunction of the Automotive Recycling System stops the movement reporting function, please follow the PDF below to enter your e-manifest after the system is restored.
Regardless of the system outage, operations such as handing over used vehicles to the next business operator can still be performed. In this case, please keep a ledger or a memo for entering necessary items for later entry and input them after the system is restored.
Please download and use the "Guide to Alternative Operations (in the event of system outage) / Recording Memo Form for Input" below to fill in the necessary items.
For CFC recovery operators
For first-time users
General Operations of the collection process
This section explains the contents and points to be checked when taking back a used car.
05:48 min.
00:00~ Verify VIN number
01:30~ Determination of equipment and type of CFCs
03:17~ Determination of airbags and other equipment
05:13~ Implementation of pickup report
CFCs Basic Knowledge of CFCs
This section provides elemental information and other explanations of CFCs
04 minutes 31 seconds
00:00~ Basic knowledge and types of CFCs
01:25~ About CFCsnot covered by the Automotive Recycling Law
02:07~ CFCsCollection Practices and Take-back Standards
02:18~ CFCKnowledge of collection machines and cylinders
CFCs Delivery of cylinders
This section explains the process of delivering cylinders to the designated pickup location after the collection of the cylinders has been completed.
01 min 39 sec
00 :00~ Designated pickup locations and transportation methods
01 :02~ Operations of designated pickup locations
Related Materials (Proper Disposal Information)
CFCsFlow up to the start of pickup
CFCsPlease review the following procedures and documents and take action before handing over the materials to the hauler.
Arrangement of logistics tools
In response to the recent accident in which CFCswas released into the atmosphere due to a fall or other impact during transportation of large cylinders,
In order to prevent leakage during transportation, we are unable to accept large cylinders that do not have a leak-proof cap and are not packed in a dedicated cylinder case.
Please prepare a dedicated cylinder case and leak prevention cap by filling out the application form below.
CFCSTHE ITEMS MUST BE STORED IN A SPECIAL TOOL IN ORDER TO BE DELIVERED TO THE FIRST-TIME VENDOR. THE ORGANIZATION WILL SEND A LOGISTICS TOOL TO THE FIRST-TIME SUPPLIER, SO PLEASE FILL OUT THE FOLLOWING APPLICATION FORM AND FAX IT TO US.
Basic Information
CFCs Basic Knowledge of CFCs
This section provides elemental information and other explanations of CFCs
04 minutes 31 seconds
00:00~ Basic knowledge and types of CFCs
01:25~ About CFCsnot covered by the Automotive Recycling Law
02:07~ CFCsCollection Practices and Take-back Standards
02:18~ CFCKnowledge of collection machines and cylinders
CFCs Delivery of cylinders
This section explains the process of delivering cylinders to the designated pickup location after the collection of the cylinders has been completed.
01 min 39 sec
00 :00~ Designated pickup locations and transportation methods
01 :02~ Operations of designated pickup locations
Related Documents
Collection related information
Method of pickup and delivery
Cylinder and Pallet Pickup Request Form
To request a pickup by fax using the designated payment-on-delivery method, fill out the "Cylinder/Pallet Pickup Request Form" and fax it to the CFC Collection Call Center.
Automobile CFCs Delivery Letter
When delivering large cylinders/dedicated pallets to the designated pickup location, an Automobile CFCs Delivery Letter must be attached to each cylinder/dedicated pallet. Please fill out the necessary information, put it in the "Automobile CFCs Delivery Letter Insert", and attach it to the large cylinders/dedicated exclusive pallets.
*If you use the designated payment-on-delivery method, you do not need to make an Automobile CFCs Delivery Letter because the CFC pickup slip brought by the carrier at the pickup time will be used as the letter.
The following explains the collection fees for CFCs and collection/actuation fees for airbags.
If you still have questions, please contact us at the contact information listed at the bottom of this page.
If you still have questions, please contact us using the contact information at this page's bottom.
CFCsPayment Methods for Collection Fees
Payable to
CFCs reported to the designated pickup location from the first day of each month to the end of the month
The payment amount will be transferred to the account of the financial institution designated by the business at the time of application for registration in the Automotive Recycling System at the end of the following month.
*If the information specified at the time of registration with the Automobile Recycling System is incomplete, the transfer of funds may be delayed.
*If you use the "designated payment-on-delivery method," the transportation charge will be paid directly to the affiliated transportation company, Yamato Transport Co., Ltd.
For inquiries regarding payment of fees, please contact
03-5405-6150Automotive Recycling Contact Center
050-3786-7755Disposal fees for CFCs and Airbags due to the start of the invoice system
If you have lost or otherwise misplaced any documents when the Automotive Recycling System Contact Center contacted regarding the response to the invoice number, please submit the following documents.
address for submission
E-mail : sg@jarp.org
FAX: 03-5405-6117
Mail: Japan Automobile Hall 16F, 1-1-30, Shiba Daimon, Minato-ku, Tokyo 105-0012, Japan
General Incorporated Association Japan Auto Recycling Partnership
About payment statements
Arrival Date
For details of the amount of CFCs collected and the payment amount, JARP will send an "Automobile CFCs Collection Amount Notification and Fee Payment Statement" for all business sites by the payment date.
For a detailed statement of the number of airbags collected (actuated) and the amount paid, JARP will send an "Airbag Collection and Actuation Fee, etc. Payment Statement" for all business sites by the payment date.
*If you have not received the statement by the payment date, please contact us using the contact information below.
Contact Information
Japan Auto Recycling Partnership Administration Department
03-5405-6150Sending address
The "Automobile CFCs Collection Amount Notification and Fee Payment Statement" will be sent to the "department in charge of recycling-related matters" registered at the time of business registration.
The "Airbag Collection and On-board Actuation Fee Payment Statement" will be sent to the "department in charge of recycling-related matters" registered at the time of business registration.
*If the delivery address changes, please change the address of the "department in charge of recycling-related matters" according to the prescribed procedure.
Contact Information
Automotive Recycling Contact Center
050-3786-7755